Home / Automotive Mechanics / Floor jacks & jack stands / 6602LP

PRODUCT REVIEW · AUTOMOTIVE MECHANICS

SUNEX 6602LP Review: Low entry and higher lift, with a different capacity tradeoff

Name: SUNEX 6602LP — 2-ton steel Low Rider floor jack
Brand: SUNEX

SUNEX 6602LP: Low entry and higher lift, with a different capacity tradeoff. A low-entry steel jack for suitable vehicles where the Arcan’s entry height or lift range does not fit the lifting task. Compare chassis reach, lifting-point access and handling weight as well as capacity.

By TradeGear HQ editorial desk · Reviewed October 16, 2026

Check Price on Amazon Back to comparison

2-ton steel Low Rider floor jackSUNEX

6602LP

Capacity: 2-ton manufacturer capacity

Research-based review

QUICK VERDICT

A low-entry steel jack for suitable vehicles where the Arcan’s entry height or lift range does not fit the lifting task. Compare chassis reach, lifting-point access and handling weight as well as capacity.

Our take

The 6602LP is a relevant alternative where the Arcan’s entry or lift range does not fit. SUNEX lists a 2.75-inch minimum and 24-inch maximum with a 2-ton rating. Those geometry advantages must be checked alongside reach, vehicle loading and steel-jack handling; they do not establish universal low-car suitability.

Best for

Approved vehicle lifting where the 2-ton rating, low entry, chassis reach and 24-inch maximum fit the task.

Skip it if

You need a higher capacity, the lifting point cannot be reached correctly or you intend to work beneath the jack alone.

Pros

2-ton manufacturer capacity
2.75–24 inch manufacturer lift range
Steel construction; dual-pump lifting system

Cons

2-ton rating differs from the 3-ton Arcan
Steel construction needs a handling and storage plan
Maximum lift does not establish safe vehicle support

MANUFACTURER SPECIFICATIONS

Key specs

Capacity2-ton manufacturer capacity

Lift range2.75–24 inch manufacturer lift range

Construction and pumpSteel construction; dual-pump lifting system

Low entry is useful only with sufficient reach

The documented 2.75-inch minimum can matter for a low lifting point, but the jack also needs to reach the approved location without contacting nearby bodywork. Check the vehicle procedure and complete chassis geometry rather than selecting from minimum height alone. A low front lip does not guarantee that the entire jack can move beneath the vehicle.

Capacity and lift range are separate specifications

SUNEX lists two tons and a 2.75–24-inch lifting range. The greater maximum height compared with Arcan A20019 may help a suitable support arrangement, but the different capacity cannot be ignored. Consider the load at the approved lifting point and all manufacturer requirements. Do not rank jacks simply by whichever maximum number appears more impressive.

Steel construction and dual-pump operation

The steel body and dual-pump system affect the practical ownership and lifting workflow. Plan movement and storage around the actual equipment and follow the manual’s maintenance and inspection guidance. Use the required hard, level load-bearing surface. A dual-pump mechanism does not make an unsuitable floor or damaged lifting point acceptable.

Build the support arrangement before buying

ESCO 10498-PAIR has a 13.2-inch minimum support height and a specific flat saddle, both of which need checking independently. Chocks address restraint rather than support. Never work beneath a vehicle supported only by the floor jack. The lifting-and-support guide links the roles, but the vehicle and equipment manuals determine the actual safe setup.

Sources and review method

Reviewed October 16, 2026 using the linked manufacturer product information and available operating documentation, together with the exact-model listing research. Technical figures are manufacturer claims; job suitability and comparisons are TradeGear HQ editorial analysis of those documented features. We have not verified every vehicle application, measured accuracy, tested load capacity or assessed long-term durability. Open the current manual and vehicle service information before use. Customer feedback and numeric ratings are displayed only when a verified record is available; their absence is not a negative rating.

This is a research-based review. We have not hands-on tested this product or independently measured its performance.

Primary manufacturer source: sunextools.com

CHECK THE CURRENT OFFER

SUNEX 6602LP

Confirm 6602LP, the selected variant, package contents and seller on Amazon.com. Prices and availability can change. As an Amazon Associate, we earn from qualifying purchases.

Check Price on Amazon

QUESTIONS & ANSWERS

Frequently asked questions

What is the listed capacity?

SUNEX specifies two tons for 6602LP.

What is the lift range?

The manufacturer lists 2.75–24 inches.

Does the higher maximum mean it suits every stand?

No. Check vehicle geometry, approved points, load, stand height and saddle compatibility together.

Compare before you buy

See the comparisons in Floor jacks & jack stands →

Arcan A20019 — 3-ton aluminium low-profile floor jack. 3 US ton / 6000 lb lifting capacity; 3.75–18 inch lift range. Use only on a suitable hard, level surface at approved lifting points. Immediately support the vehicle with appropriately selected stands; never work underneath a vehicle supported only by this jack.
ESCO 10498-PAIR — 10498-PAIR three-ton performance jack stands. Two stands with rubber flat-top saddles; Manufacturer rating 3 tons per stand. Manufacturer manual requires pair configuration for supporting a vehicle end. Do not turn the per-stand figure into an unrestricted six-ton vehicle recommendation. Match saddle and support point.

Wheel removal and refitting equipment plan →

Brake service toolkit →

Routine servicing and oil-change toolkit →

Workshop and mobile-mechanic setup →