Match access, filter geometry and fluid handling.
Confirm the engine’s filter and drain arrangement, plan safe access and capture capacity, and select the correct removal or cap tool. Keep the clean filling container separate from used-fluid capture.
Use the specified fluid, quantity, installation method and tightening requirements. The equipment list does not replace the vehicle procedure, temperature precautions or suitable disposal.
Choose a calibrated range for the fastener.
Read the equipment buying guide →TRQ50402 1/4-inch torque wrench with case
A click-type torque wrench for tightening suitable fasteners to a specified torque. Match its drive size and working range to the service information for the jobs you expect to do.
Its 20–200 in-lb range does not cover lower 10–19 in-lb settings. Use a different calibrated range when a fastener requires it.
TRQ52403 1/2-inch torque wrench with case
A second torque-wrench option for a different working range and drive requirement. Choose it around actual fastener specifications and access, rather than buying two overlapping ranges automatically.
Its 40–300 ft-lb range does not cover lower 25–39 ft-lb settings. Final tightening follows the vehicle specification, not impact-wrench settings.
3/8-inch micrometer torque wrench
A mid-range torque wrench that fills part of the gap between a small inch-pound wrench and the larger 1/2-inch TEKTON. Its 3/8-inch drive is useful where socket size, access and service torque suit this range.
Check units and tightening direction. The published accuracy declaration covers clockwise use in the upper 80% of full scale; do not assume identical accuracy at every low setting.
Separate hand-drive coverage from impact use.
Read the equipment buying guide →
80300P 51-piece 1/4-inch mechanic socket set
A socket-and-ratchet set for everyday turning and access work around a vehicle. Check the included metric and SAE sizes against the vehicles you service before using piece count to judge its usefulness.
Check that the offer is the 80300P 51-piece set. These chrome hand-drive sockets must not be assumed impact-rated.
2569 43-piece 1/2-inch metric impact socket set
An impact-socket set for compatible powered fastening work. Its drive size, socket depths and size coverage should match the impact wrench and fasteners already in your kit.
There are size skips: 25, 28 and 29 mm are not included. Match socket size, clearance and impact tool.
SKT15311 73-piece 3/8-inch socket and ratchet set
A hand-drive socket set for building broad everyday fastening coverage. Review the socket sizes and supplied drive tools so the set fills gaps in your kit rather than duplicating what you own.
Count owned tools first: kit accessories overlap separate extensions. These chrome sockets are not a substitute for the impact set.
15-piece 3/8-inch universal metric impact socket set
A metric impact-socket set with articulating joints for fasteners that cannot be approached straight on. It adds access capability rather than duplicating a deep socket set in a smaller case.
Check joint clearance, socket size and tool instructions before powered use. This is the 84918N universal set, not a conventional chrome hand-socket set.
Lifting equipment and support equipment have separate roles.
Read the equipment buying guide →
3-ton aluminium low-profile floor jack
An aluminium floor jack for raising a vehicle at its approved lifting points before suitable supports are installed. The low-profile design is useful only where its entry height, reach and lift range fit the vehicle.
Use only on a suitable hard, level surface at approved lifting points. Immediately support the vehicle with appropriately selected stands; never work underneath a vehicle supported only by this jack.
10498-PAIR three-ton performance jack stands
A pair of pin-adjusted jack stands for supporting a suitably raised vehicle at approved support locations. Check working height, saddle contact, ground conditions and the manufacturer’s capacity instructions together.
Manufacturer manual requires pair configuration for supporting a vehicle end. Do not turn the per-stand figure into an unrestricted six-ton vehicle recommendation. Match saddle and support point.
2-ton steel Low Rider floor jack
A low-entry steel jack for suitable vehicles where the Arcan’s entry height or lift range does not fit the lifting task. Compare chassis reach, lifting-point access and handling weight as well as capacity.
Use on a suitable hard, level surface at approved lifting points. Install correctly selected stands before working beneath a vehicle; a jack’s maximum height alone does not establish vehicle suitability.
Keep dirty-fluid capture separate from clean dispensing.
Read the equipment buying guide →
17922 multi-drain tub
A broad drain tub for collecting used fluids during suitable oil, transmission, differential or radiator service. Check its footprint and height against the space below the vehicle before ordering.
Check under-vehicle clearance and expected fluid volume/temperature. Used-fluid capture and clean filling require separate containers.
19752 six-quart oil dispenser, red spout
A dispensing container for transferring the correct service fluid into a suitable fill point. Keeping clean filling equipment separate from used-fluid collection helps avoid contamination.
Keep the dispenser clean and dedicated to compatible fluids. The selected 19752 has a red flexible spout; it is not a used-fluid drain container.
Fluid Evacuator Plus manual extractor and dispenser
A manual extractor and dispenser for compatible fluids and service procedures. It offers a different collection method from a drain tub where the engine or system permits extraction through an appropriate tube.
Confirm the fluid, temperature limits and access method in the instructions. Do not assume extraction removes all fluid or replaces a required drain-plug or filter-service procedure.
Identify the filter design before choosing the tool.
Read the equipment buying guide →
63600 spin-on oil-filter removal wrench
An adjustable oil-filter wrench for compatible spin-on filters where access permits. Check filter diameter and surrounding clearance before assuming it will reach the filter on your vehicle.
Not for installing or tightening a filter. Match diameter and access; cartridge caps need a different tool.
13270 seven-piece low-profile filter socket set
A low-profile filter-cap socket set for compatible filter housings and caps. Match the exact profile and size to the vehicle rather than assuming that a visually similar cup is interchangeable.
Match exact cap geometry and engine. A size list alone is not universal filter compatibility.
Wide Range spin-on oil-filter removal wrench
A removal wrench for larger spin-on filters than the Lisle 63600’s stated range. Choosing between the two starts with the filter’s diameter and the space around it.
Use it to remove a compatible spin-on filter, not to tighten a replacement or turn a plastic cartridge-filter cap. Check the available drive clearance before ordering.
Choose for visibility, access or retrieval.
Read the equipment buying guide →
66118 Stylus Pro penlight, black
A slim penlight for looking into confined engine-bay, cabin and under-vehicle spaces. Its pocket size makes it a useful companion to a larger work light rather than the only lighting in the bay.
A compact black AAA penlight for close inspection. The stated output and runtime are manufacturer figures, rather than our own measurements.
2125-20 M12 underhood light, bare tool
A cordless underhood light for illuminating the engine bay during inspection and service. Check the mounting arrangement, vehicle opening and battery requirements before buying the bare tool.
The -20 offer is the bare underhood light. Budget for a compatible M12 battery and charger, and check that the hooks fit the vehicle.
HT-2 telescoping magnetic pickup tool
A telescoping magnetic pickup tool for retrieving suitable ferrous items from awkward spaces. It is a useful small addition for dropped fasteners that remain visible or can be located safely.
Check that the selected model is HT-2. Its magnetic pickup claim depends on the object and contact conditions and is not a rating for lifting equipment.
HTC-2 telescoping inspection mirror, black
A telescoping inspection mirror for viewing behind components and around obstructions. Pair it with a light when a direct line of sight is blocked.
The 2.25-inch round mirror and adjustable head suit inspection behind components. Check collapsed size before choosing it for a small pocket or pouch.
Select for the assessed hazard.
Read the equipment buying guide →
Dominator clear-lens safety glasses
Clear-lens safety glasses for suitable indoor workshop tasks. They are the DPG94-1D industrial variant; the exact lens and model should be checked when ordering.
Clear lenses preserve visibility indoors. Match eye protection to the task; safety glasses alone do not cover every grinding, chemical-splash or face-protection requirement.
X4A PELTOR over-head hearing protectors
Headband earmuffs for a workshop hearing-protection kit. Selection depends on noise exposure, fit and compatibility with other protective equipment.
Fit and exposure matter as much as the labelled NRR. These are the X4A headband earmuffs, not a hard-hat attachment.
70472 rubber wheel chocks, two-pack
Rubber wheel chocks for helping restrain an appropriately parked vehicle during suitable workshop work. Match their size and use to the tyre, surface and equipment procedure.
Check the manufacturer’s instructions against the vehicle, surface and intended use. Wheel chocks complement suitable lifting and support equipment; they do not replace jack stands.
Manufacturer research, not hands-on testing. As an Amazon Associate, we earn from qualifying purchases.