Plan support, removal and final tightening together.
Check approved lifting points and surface conditions, select suitable lifting and support equipment, then match sockets and access tools to the fasteners. Include an appropriate calibrated torque wrench for the vehicle’s final tightening specification.
A floor jack is not working support. An impact setting does not establish final wheel torque. Check pressure against the vehicle cold-pressure specification after the relevant service checks.
Choose a calibrated range for the fastener.
Read the equipment buying guide →TRQ50402 1/4-inch torque wrench with case
A click-type torque wrench for tightening suitable fasteners to a specified torque. Match its drive size and working range to the service information for the jobs you expect to do.
Its 20–200 in-lb range does not cover lower 10–19 in-lb settings. Use a different calibrated range when a fastener requires it.
TRQ52403 1/2-inch torque wrench with case
A second torque-wrench option for a different working range and drive requirement. Choose it around actual fastener specifications and access, rather than buying two overlapping ranges automatically.
Its 40–300 ft-lb range does not cover lower 25–39 ft-lb settings. Final tightening follows the vehicle specification, not impact-wrench settings.
3/8-inch micrometer torque wrench
A mid-range torque wrench that fills part of the gap between a small inch-pound wrench and the larger 1/2-inch TEKTON. Its 3/8-inch drive is useful where socket size, access and service torque suit this range.
Check units and tightening direction. The published accuracy declaration covers clockwise use in the upper 80% of full scale; do not assume identical accuracy at every low setting.
Separate hand-drive coverage from impact use.
Read the equipment buying guide →
80300P 51-piece 1/4-inch mechanic socket set
A socket-and-ratchet set for everyday turning and access work around a vehicle. Check the included metric and SAE sizes against the vehicles you service before using piece count to judge its usefulness.
Check that the offer is the 80300P 51-piece set. These chrome hand-drive sockets must not be assumed impact-rated.
2569 43-piece 1/2-inch metric impact socket set
An impact-socket set for compatible powered fastening work. Its drive size, socket depths and size coverage should match the impact wrench and fasteners already in your kit.
There are size skips: 25, 28 and 29 mm are not included. Match socket size, clearance and impact tool.
SKT15311 73-piece 3/8-inch socket and ratchet set
A hand-drive socket set for building broad everyday fastening coverage. Review the socket sizes and supplied drive tools so the set fills gaps in your kit rather than duplicating what you own.
Count owned tools first: kit accessories overlap separate extensions. These chrome sockets are not a substitute for the impact set.
15-piece 3/8-inch universal metric impact socket set
A metric impact-socket set with articulating joints for fasteners that cannot be approached straight on. It adds access capability rather than duplicating a deep socket set in a smaller case.
Check joint clearance, socket size and tool instructions before powered use. This is the 84918N universal set, not a conventional chrome hand-socket set.
Build a useful kit by function.
Read the equipment buying guide →
SBH00224 24-inch breaker bar
A long breaker bar for applying controlled manual leverage to suitable fasteners. It provides a separate tool for loosening work before a torque wrench is used for specified tightening.
Manual loosening and controlled leverage; not a calibrated torque wrench or an impact-drive accessory.
SHA91011 four-piece 3/8-inch extension set
A socket-extension set for reaching fasteners beyond a ratchet’s immediate clearance. Different lengths help position the handle where there is room to turn it.
Optional purchase if the socket kit already supplies the required reach; not advertised here as impact-rated.
80066H 20-piece mechanic screwdriver set
A screwdriver set for common manual fastening tasks and workshop access work. Choose tip sizes that fit the screw properly and avoid using a screwdriver as a pry bar.
Exact H suffix matters. Includes small precision profiles and T15/T20, not a complete Torx fastener range. Choose an appropriate profile and avoid using screwdrivers as pry bars.
D203-8 eight-inch needle-nose side-cutting pliers
Long-nose pliers for reaching and handling small parts in confined spaces. Their narrow jaws are useful where fingers or broader pliers cannot get a controlled grip.
The standard model is not the insulated -INS or glow-handle -GLW variant. Ordinary handle covering is not electrical insulation.
D228-8 eight-inch diagonal-cutting pliers
Diagonal-cutting pliers for appropriate wire and cutting tasks in a mechanic’s hand-tool kit. Check the material and capacity before cutting hardened components or using excessive leverage.
This is the standard version, rather than -INS or tethered -TT. Use it for appropriate cutting material, not hardened automotive fasteners.
502L3 Original 10WR curved-jaw locking pliers
Curved-jaw locking pliers for holding suitable parts during workshop work. Jaw adjustment and release access matter, and the jaws can mark finished surfaces.
The selected 502L3 is one 10WR curved-jaw locking plier. Locking jaws can mark fittings; choose a proper flare-nut or combination wrench for precision fittings.
87 01 250 ten-inch Cobra water-pump pliers
Adjustable water-pump pliers for gripping suitable parts of different sizes. They complement fixed-size wrenches, particularly where a secure grip matters more than protecting a finished surface.
Serrated jaws suit gripping tasks but can mark precision fittings. Check the exact 87 01 250 handle configuration when ordering.
80742 84-piece hex/Torx bit socket set
A bit-socket set covering several hex and Torx fastener profiles used around vehicles. Identify the exact profile and size before applying torque; similar-looking profiles are not interchangeable.
Manufacturer explicitly limits use to manual drive tools: do not put these on the cordless impact wrench. Match individual sizes to the course and serviced vehicles.
61366 Dominator five-piece curved pry-bar set
A handled pry-bar set for controlled leverage in appropriate mechanical service work. The different bar sizes help with access, but the contact point must tolerate the applied load.
Choose bar length for access and controlled leverage, protect adjacent parts and avoid using a screwdriver as a substitute. Individual bar lengths need confirmation before a length-specific purchase.
31750 four-piece mini hook-and-pick set
A pick-and-hook set for reaching seals, clips and small components during suitable service tasks. Work carefully around sealing surfaces and wiring insulation that a sharp tip could damage.
Useful for clips, seals and O-rings with care; sharp picks can score sealing surfaces. Not a heavy pry-bar substitute.
35440 three-piece body-trim tool set
A trim-removal tool set for suitable panel clips and fasteners. Choose the tool that supports the clip or panel properly before applying force.
A metal fastener/clip set, not an all-plastic no-mar trim-pry kit. Match clip design and protect visible surfaces.
32500HD impact-rated 11-in-1 screwdriver/nut driver
A multi-bit screwdriver and nut-driver tool for keeping common manual fastening options together. Check the included profiles and avoid applying it to fasteners that need a more suitable dedicated tool.
This is the 32500HD rather than the 32500HDRT ratcheting version or an insulated driver. The standard 1/2-inch nut-driver function is not described as an impact power nut driver.
33-725 FATMAX Classic 25-foot tape measure
A 25-foot tape measure for workshop layout and general dimensional checks. It complements automotive measuring tools without replacing the precision instruments required for component tolerances.
This is the single 25-foot FATMAX tape. A tape measure helps with general dimensions; use a suitable precision rule or gauge for component clearances.
Breakaway work and fastener run-down are different jobs.
Read the equipment buying guide →
2962-20 M18 FUEL 1/2-inch mid-torque impact wrench
A cordless impact wrench for repeated removal and run-down of suitable vehicle fasteners. Budget separately for the battery system, impact-rated sockets and a torque wrench for final tightening.
Battery and charger are separate. Breakaway torque does not establish final fastener torque; finish with a calibrated torque wrench to the vehicle specification.
2567-20 M12 FUEL 3/8-inch high-speed ratchet
A cordless ratchet for turning accessible fasteners quickly once the job is set up. Its head clearance and battery system are more useful buying considerations than treating it as a substitute for an impact wrench.
Battery and charger are separate. Use the powered ratchet to run suitable fasteners, then use the specified manual or calibrated tool for final tightening.
20V MAX XR 1/2-inch mid-range impact wrench, bare tool
A DEWALT-platform alternative to the Milwaukee M18 mid-torque impact wrench for suitable removal and run-down work. Owning compatible batteries can matter more to the total purchase than a headline torque figure.
Choose the DCF891B hog-ring bare tool, not a detent-pin or battery-kit variant. Use impact-rated sockets and a calibrated torque wrench for specified final tightening.
Lifting equipment and support equipment have separate roles.
Read the equipment buying guide →
3-ton aluminium low-profile floor jack
An aluminium floor jack for raising a vehicle at its approved lifting points before suitable supports are installed. The low-profile design is useful only where its entry height, reach and lift range fit the vehicle.
Use only on a suitable hard, level surface at approved lifting points. Immediately support the vehicle with appropriately selected stands; never work underneath a vehicle supported only by this jack.
10498-PAIR three-ton performance jack stands
A pair of pin-adjusted jack stands for supporting a suitably raised vehicle at approved support locations. Check working height, saddle contact, ground conditions and the manufacturer’s capacity instructions together.
Manufacturer manual requires pair configuration for supporting a vehicle end. Do not turn the per-stand figure into an unrestricted six-ton vehicle recommendation. Match saddle and support point.
2-ton steel Low Rider floor jack
A low-entry steel jack for suitable vehicles where the Arcan’s entry height or lift range does not fit the lifting task. Compare chassis reach, lifting-point access and handling weight as well as capacity.
Use on a suitable hard, level surface at approved lifting points. Install correctly selected stands before working beneath a vehicle; a jack’s maximum height alone does not establish vehicle suitability.
A portable pressure check or a workshop air connection?
Read the equipment buying guide →
3018 digital tyre inflator with hose
A digital tyre inflator for measuring and adjusting pressure with a suitable compressed-air supply. Consider the hose, chuck and workshop airline connection as part of the complete setup.
Resolution is not accuracy. Needs an appropriate compressed-air supply; follow the vehicle pressure specification and the inflator manual.
S-921 passenger-car pencil tyre-pressure gauge
A compact pencil-style tyre-pressure gauge for straightforward pressure checks. Confirm that its range and resolution suit the vehicle’s specified cold tyre pressures.
Check that the required cold tyre pressure lies inside its stated range. This is a passenger-car gauge, not a high-pressure truck gauge.
Select for the assessed hazard.
Read the equipment buying guide →
Dominator clear-lens safety glasses
Clear-lens safety glasses for suitable indoor workshop tasks. They are the DPG94-1D industrial variant; the exact lens and model should be checked when ordering.
Clear lenses preserve visibility indoors. Match eye protection to the task; safety glasses alone do not cover every grinding, chemical-splash or face-protection requirement.
X4A PELTOR over-head hearing protectors
Headband earmuffs for a workshop hearing-protection kit. Selection depends on noise exposure, fit and compatibility with other protective equipment.
Fit and exposure matter as much as the labelled NRR. These are the X4A headband earmuffs, not a hard-hat attachment.
70472 rubber wheel chocks, two-pack
Rubber wheel chocks for helping restrain an appropriately parked vehicle during suitable workshop work. Match their size and use to the tyre, surface and equipment procedure.
Check the manufacturer’s instructions against the vehicle, surface and intended use. Wheel chocks complement suitable lifting and support equipment; they do not replace jack stands.
Manufacturer research, not hands-on testing. As an Amazon Associate, we earn from qualifying purchases.